Tweet
Unit starts vacuum pulses on Cycle #2 and fails "Low Temp" after hanging on Vacuum Pulse 3 Heat Stage.
History: unit passed vacuum test and first #1 Flash Cycle. Then failed within in minutes of the end of Next cycle#3.
Now, it fails every cycle (when warmed up) after failing to reach sterilization temp and pressure.
Any ideas what the problem was?
I figured it out and the machine is up and running now.
History: unit passed vacuum test and first #1 Flash Cycle. Then failed within in minutes of the end of Next cycle#3.
Now, it fails every cycle (when warmed up) after failing to reach sterilization temp and pressure.
Any ideas what the problem was?
I figured it out and the machine is up and running now.